-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Custom bumpers
- Thread starter Tyl012
- Start date
dilligaf13
Active member
- 561
- 28
- 28
- Location
- south, florida
Bunch of guys have done it. What are you looking to do??
- 14,206
- 1,572
- 113
- Location
- Dayton, OH
I wish I had taken the member up on the free MRAP bumpers that he was giving away in Columbus a while back.
I'd like to put one on my M813.
I'd like to put one on my M813.
- 5,921
- 4,066
- 113
Free mrap bumpers? Wow....
Attachments
- 5,580
- 344
- 83
- Location
- DESOTO, KANSAS
Did the same thing 
Last edited:
- 14,206
- 1,572
- 113
- Location
- Dayton, OH
Yeah, but the free one was for the big MRAP. 
- 5,921
- 4,066
- 113
The hood tips forward, which complicates matters. Probably want to hinge the brushguard portion
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 747
- 113
- Location
- Cincy Ohio
There is these...
Attachments
- 5,921
- 4,066
- 113
Is it considered poaching to deer hunt with a bumper?
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 747
- 113
- Location
- Cincy Ohio
I think that was Captain Kangaroo!
J/k
J/k
I have addressed the front and rear of my 5 Ton.
Yes I sell parts to do some of this stuff.
Up front I pulled the cheesy lightweight winch-keeper-channel and
replaced it w/ a heavy piece of structural steel channel, something like
10" x 2" Steel channel to give me a frame to attach a Pioneer tool
rack and RCLs and IRs etc.
I sell a bracket you attach to the front
bumper to mount an Antenna. I use the antenna as a height
gauge, works really good. Unseen is a vise mount like you would
see on a 5 Ton wrecker on the top of the bumper.
In back I made a civilian hitch drop. You buy the crossbar, I supply
the 2 drops and gussets w/ stars in them. After that you can fab up a
towbar holder, look at the pic.
think of what you want it to do then make is so! (and post up pics!)
Yes I sell parts to do some of this stuff.
Up front I pulled the cheesy lightweight winch-keeper-channel and
replaced it w/ a heavy piece of structural steel channel, something like
10" x 2" Steel channel to give me a frame to attach a Pioneer tool
rack and RCLs and IRs etc.
I sell a bracket you attach to the front
bumper to mount an Antenna. I use the antenna as a height
gauge, works really good. Unseen is a vise mount like you would
see on a 5 Ton wrecker on the top of the bumper.
In back I made a civilian hitch drop. You buy the crossbar, I supply
the 2 drops and gussets w/ stars in them. After that you can fab up a
towbar holder, look at the pic.
think of what you want it to do then make is so! (and post up pics!)
Last edited:
wreckerman893
Possum Connoisseur
- 15,612
- 1,984
- 113
- Location
- Akenback acres near Gadsden, AL
Only if you are running 60 MPH through a corn field.
- 7,390
- 2,439
- 113
- Location
- Interlachen Fl.
My new M920 front bumper. Don't get in my way!
Attachments
Last edited:
- 1,450
- 119
- 63
- Location
- Gray, GA
I like that. One day I'll get started on mine...one day.
I have a bunch of those shackles and mounts like you used for sale if anybody needs some. They're new and are already CARCed.
440Duster
New member
- 43
- 1
- 0
- Location
- Macomb/Oklahoma
I used my JD2 bender and fashioned a brush guard out of 1.75 schedule 40 pipe and mounted some KC Daylighters. Since I scored 3 MRAP bumpers today at GL OKC, I will investigate installing on View attachment 569261
e.
View attachment 569261
e.
View attachment 569261
lindsey97
Member
- 738
- 14
- 18
- Location
- wynnewood, oklahoma
better yet, if it is night time and the headlights are on is it considered spotlighting?