m1010freedom
Member
- 43
- 0
- 6
- Location
- manhattan beach CA
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
99% sure you have to pull the pump again. You have to pull the tube off to get to the gear bolts anyway. You can knock it out in 4 hours or less.Is there a reason i cant just pull the oil fill tube and then push it straight in from there??
Yes the reason it is not possible. It fits very snug in the pump and sits lower than the access hole. It will cause a premature IP failure if not installed.Is there a reason i cant just pull the oil fill tube and then push it straight in from there??