• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce going to scrapper

bigdog12

New member
32
0
0
Location
Riceville TN
This maybe the wrong forum,but I ran across a deuce yesterday without a front axle.Italked to the guy and he said the rest was goin to scrap,so if anyone needs anything let me know,give me a price and Ill see what he sell.The guy said he would take it next week sometime.
 

RANDYDIRT

New member
403
4
0
Location
Furlow Ar.
You need to give the guy a couple of C notes to let you strip the goodies off it, the he could still scrap the rest. Win-Win situation! BTW, I need an ignition switch and handle that isn't wore out. I can actually move the handle on mine with the screw tight. I'd give $20 total with shipping.
Dirt:driver:
 

bigdog12

New member
32
0
0
Location
Riceville TN
Ill get those parts off from it,no winch,truck is a hard top but top is rough,engine is a none turbo,trans is there and t case is air shift,truck also has spring ride seat
 

Biggles

Member
248
0
16
Location
Pawnee, IL
Exactly how rough is the top? does it have the straps on the pioneer rack? I need some hardware and bracketry off of the folding arm thingy for the passenger bench seat. I'm sure I could think of other little odds and ends.
 

gjeans

New member
2
0
0
Location
Kingsport, TN
Just bought my first deuce.
Need Troop seats.
Only 2hours away in Kingsport, TN.
Let me know if troops seats are present, condition, and cost.
/GregEJ
 

rebel5909

New member
32
0
0
Location
chattanooga tn
tell the guy i will give him scrap price for whatever is left over! i need all shorts of stuff, two doors, bed, radiator, frame, rear axels........need it for a lil project i want to build! thanks
 

bigdog12

New member
32
0
0
Location
Riceville TN
Does not have any windsheilds or troop seats,NDT ties 4 are useable, 1 door is good,top looks complete but is rusted out straps look ok,parts for seats are there,got gauge cluster,I also have another one
 

panshark

Member
544
11
18
Location
Idaho Falls, ID
any way you could get a brake light assembly off and mail it to Idaho in a flat rate box? The extreme cold out here cracked the plastic on one of mine.
 

Jakob

Member
722
5
18
Location
Louisville, KY
I need the whole starter and the starter solenoid. Push button from inside the cab too if you can. Just let me know what you want for it and shipping.
 
Top