• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

ECO DIRECT DRIVE HUBS

Xengineguy

Well-known member
Supporting Vendor
216
745
93
Location
USA Indiana
Availability to be announced. First 10 sets will be ready soon. Tested on M1078 will fit others also.
At the request of moderators please use this thread for sales related questions. Let me know if you have interest
in a set by posting here . Thank you!

For more information and ordering check out Ecohubs.net. Also Email. Ecohubs78@gmail.com
 
Last edited:

Ronmar

Well-known member
3,388
6,810
113
Location
Port angeles wa
Ok, looks like we can post here now. As discussed on messenger, i would like a set for a 4X truck. I have some pretty good terrain on my property where I can do before and after power requirement testing...
 

Xengineguy

Well-known member
Supporting Vendor
216
745
93
Location
USA Indiana
Thanks guys. Great support from this group! Can’t wait for some feedback. You’re going to be surprised at how much better you trucks drive . I used to hate the first few shifts, the problem is gone completely! Now the torque converter dampens the shift,
No more neck break, spill your coffee shift!A2F699C2-6012-44AC-BADA-F99A3F2B0C7C.jpeg
 

art1078

New member
3
6
3
Location
Canada
Availability to be announced. First 10 sets will be ready soon. Tested on M1078 will fit others also.
At the request of moderators please use this thread for sales related questions. Let me know if you have interest
in a set by posting here . Thank you!
Would love a set for the m1078 please the 55 at 2600 rpm is a little excessive
Availability to be announced. First 10 sets will be ready soon. Tested on M1078 will fit others also.
At the request of moderators please use this thread for sales related questions. Let me know if you have interest
in a set by posting here . Thank you!
 

TGeorge

Member
37
60
18
Location
Gardnerville, NV
Availability to be announced. First 10 sets will be ready soon. Tested on M1078 will fit others also.
At the request of moderators please use this thread for sales related questions. Let me know if you have interest
in a set by posting here . Thank you!
Help a newbie! Just became the proud owner of a 2006 M1078A1 What do these hubs do and why should I want them? Thanks!
 

TomTime

Well-known member
Steel Soldiers Supporter
690
1,665
93
Location
MD.
Help a newbie! Just became the proud owner of a 2006 M1078A1 What do these hubs do and why should I want them? Thanks!
Read through this thread. Start at page 1.

 

Xengineguy

Well-known member
Supporting Vendor
216
745
93
Location
USA Indiana
Help a newbie! Just became the proud owner of a 2006 M1078A1 What do these hubs do and why should I want them? Thanks!
The short of it is these hubs replace the outer reduction 2:1 with 1:1 direct drive. Reducing engine rpm by 50%. Increasing fuel mileage. Reduces noise in cab dramatically! Making you new to you M1078 much more drivable and fun!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks