Randyw
Member
- 101
- 6
- 18
- Location
- Bridge City Tx.
Does anyone happen to know what the torque specs are for the front diff caps?
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Item | Spec | Unit |
Pinion bearing preload (new) | 20-30 | inch pounds |
Pinion bearing preload (used) | 8-10 | inch pounds |
Pinion bearing HP60 used in rear | 12-20 | inch pounds |
Backlash | 6-10 | thousandths of an inch |
front wheel bearing freeplay | 1-10 | thousandths of an inch |
Ring gear bolt torque | 110 | foot lbs |
Bearing cap bolt torque | 80 | foot lbs |
Cover bolt torque | 30-40 | foot lbs |
Pinion nut torque | 240-300 | foot lbs |
Cover fill plug | 40 | foot lbs |
Yoke U-joint bolts | 8-15 | foot lbs |
wheel brg adjusting nut | 50 | foot lbs - then back off approx. 90° |
wheel brg locknut | 50-70 | foot lbs |
Kingpin | 500-600 | foot lbs |
Upper and lower kingpin cover bolts | 70-90 | foot lbs |
Spindle nuts (the ones that hold the spindle to the knuckle.) | 65 | foot lbs |