• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

front drive shaft question

bryan70546

New member
410
1
0
Location
Lake Charles La
SS experts , I have a quick question I have noticed a vibration that is like a humming noise that echoes threw out the deuce while driving down the road , I was under the truck today and found that the front driveshaft rear u-joint has some deflection in it OD Iron LLC Military Vehicle Parts and Accessories all the other drive shafts are nice and tight , would this cause this vibration that come and goes while driving i plan on changing the u-joint reguardless .
Thanks everyone .
Bryan
 

bryan70546

New member
410
1
0
Location
Lake Charles La
darn thats sucks , I have used them a bunch of times and never had any problems , Wont be doing any thing any time soon so that gives some time to find another sourse maybe can find them locally
 

glcaines

Well-known member
Steel Soldiers Supporter
3,835
2,399
113
Location
Hiawassee, Georgia
Westech,
If you used a credit card, I would contest the charge, if it is within 60 days of appearing on the bill.
 

Westech

CPL
6,104
206
63
Location
cow farts, Wisconsin
already on that.... I not happy at all.. it seams like every week there is a problem with OD iron. I think its time he just stop selling parts. Its too much of a pain in the rear for half the orders to get messed up. And the New star parts are really crappy. the starter switch I got I bet I will be replacing with in the year. Just junk.
 

Westech

CPL
6,104
206
63
Location
cow farts, Wisconsin
we beyond nice now.. I just T'ed off. But anyway.. this is about a U joint not ODiron..... I have used the napa u joints and there really good stuff. little more $ like 5 bucks.. but you know if there is problem its just a trip down the road and no shipping. you really have to do your home work.. night be a buck less some place else.. but shipping and if there is a problem is worth $ ya know...
 

tie6044

Active member
Steel Soldiers Supporter
860
42
28
Location
Blaine, MN
Or if you want a really nice u-joint go to your local 4x4 shop, they probably handle Spicer joints. I run them in my mud truck (standard 1410 size) and they hold up great to over 700 horse with 57" tall tires.
 

FormerNewMVGuy

Active member
1,237
9
38
Location
stockton NJ
The vibration could be a tire also, I had a vibration in my truck that ended up being a underinflated tires. Of course my other deuce had a vibration that was a badly pitted bearing race.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks