front wheelspacers for cucv

[itsunday25]

I just got my 37 in military tires and rims back fit good but front dont where can i get spacers and what size would i need.

 

[WARWAG]

2" width with 9/16" studs NOT THE 14.5 MM as most people will try and sell you. GET THE 9/16" studs. Ebay is a good place to look.

 

[WARWAG]

Torque to specs when you install them.

 

[itsunday25]

Can i get the studs at napa

 

[WARWAG]

The studs that come on the 2" wide wheel spacers need to be the 9/16" studs instead of the 14.5mm studs that some will show as what you need for that year of vehicle. You dont need to buy them seperately. They will already be installed. I will try and find you a link.

 

[WARWAG]

The studs that come on the 2" wide wheel spacers need to be the 9/16" studs instead of the 14.5mm studs that some will show as what you need for that year of vehicle. You dont need to buy them seperately. They will already be installed. I will try and find you a link.

Here you go:


4 x | 2" | 8x6.5 to 8x6.5 | 8Lug | 9/16" Studs | Wheel Adapter Spacer | eBay

Ignore there guide. They say to use 8x165mm x14.5studs. Morons.

 

[ryan77]

You also will need new lug nuts that are thinner! I got mine from summit racing. You will have to se a thin wall socket as a impact socket wont fit!!

 

[WARWAG]

You also will need new lug nuts that are thinner! I got mine from summit racing. You will have to se a thin wall socket as a impact socket wont fit!!

The lug nuts that come with the Spacers will be the ones that are thinner. He just needs to use his original lug nuts to hold the wheel on again. Thats why he needs the 9/16" studs on the wheel spacers. No need to buy lugnuts.

 

[WARWAG]

Yes he will need a thin wall deep socket to install the spacers. Take one of your spacers to the automotive store and find a socket that will work.

 

[ryan77]

The spacers i bought of ebay had the wrong lug nuts, Thats why i had to get the ones from ebay!!

 

[WARWAG]

That is why he needs to get the 9/16" studed wheel spacers. The 14.5mm studed wheel spacers requier you to by a diffrent set of lug nuts. Get the 9/16" studed wheel spacers and all will be fine. The lug nuts that come on the wheel spacers are used to bolt the wheel spacer to the wheel hub. Your old stock lug nuts will be used to bolt the tire back onto the vehicle. Simple. DONT BUY WHAT THE STUPID CATALOG SAYS YOU NEED TO BUY ITS WRONG

The bolt pattern is 8x6.5 NOT165mm! Get 9/16" Studs NOT 14.5mm. IF YOU DO YOU WILL HAVE TO TRACK DOWN A SET OF LUG NUTS FROM SUMMIT RACING. Avoid all that and get the right ones the first time. SIMPLE.

 

[timarr]

I got two sets of the correct spacers from rough country, their clearance section . 50 bucks a set plus 14 bucks for both together to ship.

 

[WARWAG]

Excellent!

 

[itsunday25]

Thanks guys

 

[hogtruck]

Try this. select 2 in.

Wheel Adapter 8650-8650D Wheel Adapters