• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Fuse Panel

stationjj

Member
263
1
18
Location
Middle Tennessee
Hey,

How hard is it to remove the fuse panel inside the truck? I am currently having an issue with front battery not charging. As per a post from Warthog on this thread;
http://www.steelsoldiers.com/showthread.php?139456-Front-Battery-not-charging-Alternator-tests-good

I discovered my heater fuse had melted. The heater fuse is in a tough spot. I cleaned it the best I can, but it needs more work. Actually not sure if it can be repaired? How hard is it to remove the fuse panel inside. Is it just a nightmare to deal with?


Thank you for any ideas and suggestions?

stationjj
 

MuleMac01

Military vehicle collector
Steel Soldiers Supporter
891
159
43
Location
Las Vegas Nevada
2 bolts inside the cab hold it onto the fire wall.. and also 1 bolt inside the engine compartment holds the wires onto the fuse block remove the bolts and pop it lose.. real ez.
 

stationjj

Member
263
1
18
Location
Middle Tennessee
Thanks for the reply. I apologize for the stupid question. At the time I was in a bind. I was unsure about what I was getting into with regard to my auto repair experience.
I was wanting some direction. Yes, I did search via google, but I couldn't what I was looking for.

stationjj
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks