jplace1011
Well-known member
- 458
- 481
- 63
- Location
- Santa Ana, CA
What the heck did I do? I was cleaning the plugs for the alternators of my M1009. I accidentally made contact with my tiny screw driver and a plug prong in the alternator on the passengers side. A spark or two flew.
I first checked all of the fuses, none were blown. The Gen 2 Light is now on whenever I start the vehicle. The Fuel Gauge Stopped working too. Did I blow a Relay, did I destroy the alternator??
I suspect this has been asked before, I’ll be digging again in the TMs but you guys are much more helpful.
Thanks for any help!
The plugs really needed cleaning!!
I first checked all of the fuses, none were blown. The Gen 2 Light is now on whenever I start the vehicle. The Fuel Gauge Stopped working too. Did I blow a Relay, did I destroy the alternator??
I suspect this has been asked before, I’ll be digging again in the TMs but you guys are much more helpful.
Thanks for any help!
The plugs really needed cleaning!!
![](http://uploads.tapatalk-cdn.com/20220310/3012431158a022ee92d0efe9458b046a.jpg)
![](http://uploads.tapatalk-cdn.com/20220310/8fdc5236840b8228265fd3364350a369.jpg)
Last edited: