sixb
New member
- 50
- 0
- 0
- Location
- West Jordan UT
well I rebuilt both alternators and now the gen 2 light comes on and off every now and again. The charge gauge is in full green. What gives?
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
batteries checked good at autozone for what thats worth, the stickers on them say March of 03Did you personally rebuild them, or have someone else do it. What was done to rebuild them?
had a local shop do it.
Are your belts new and tight?
yes and yes
You could swap the 2 alternators positions and see if the problem moves to Alt 1, to see if your alt is still bad, or you can follow the troubleshooting guide in the TM.
I plan on swaping them after work.
If indeed your alts are both good, I would guess you have a bad connection or a bad battery.
That's what I needed to know! Thanks!No special parts need to be purchased to rebuild it, the plastic insulators(keeps it isolated) are reused.
The alternator is a 100 amp, delco 27si, type 200, it uses type 100 bearings . That's all you need to know to order the internals to rebuild it. I like to buy a low speed and low voltage triggered regulator.
There a lots of online places to order the parts from.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!