Hardware needed for MWO 9-2330-392-20-2 m1102

[MESHL57492]

I would like to do MWO 9-2330-392-20-2. What hardware is needed. I read the MWO but I would like to go down to the local hardware store and buy the nuts and bolts. So can anybody tell me in pain english what size of bolts, nuts and washers needed to do MWO 9-2330-392-20-2. Thanks for your time

 

[emmado22]

google the part #'s. That will bring up the info on what you need.

 

[MESHL57492]

so far I found the Screw, Cap, Hex Head is 3/8 16 x5 and self locking nut is 3/8 16. All I found on the washers are inner .406 in outside .812 in and thickness of 0.035, .763-.783 inner 1.271 outer and thickness of 0.198 for locking washer, and Nut, Self-Locking 5/8 - 11 does this seem right?

 

[emmado22]

yep.

 

[MESHL57492]

went to the local hardware store found all the parts needed for about 3 dollars I hate to know how much the gov spends on the same parts

 

[emmado22]

They also use class 8 hardware, not the cheapo stuff.

 

[MESHL57492]

I bought all grade 8 stuff I have a hardware surplus store down the road they are almost 1/2 the price of the big box stores. I wouldn't go and use cheap stuff to bolt the landing gear to the trailer. That is just asking for trouble

 

[emmado22]

You should be good to go then. Have fun grinding out all those rivets.