• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Hardware needed for MWO 9-2330-392-20-2 m1102

MESHL57492

New member
19
0
0
Location
WILLIAMSPORT PA
I would like to do MWO 9-2330-392-20-2. What hardware is needed. I read the MWO but I would like to go down to the local hardware store and buy the nuts and bolts. So can anybody tell me in pain english what size of bolts, nuts and washers needed to do MWO 9-2330-392-20-2. Thanks for your time
 

Attachments

MESHL57492

New member
19
0
0
Location
WILLIAMSPORT PA
so far I found the Screw, Cap, Hex Head is 3/8 16 x5 and self locking nut is 3/8 16. All I found on the washers are inner .406 in outside .812 in and thickness of 0.035, .763-.783 inner 1.271 outer and thickness of 0.198 for locking washer, and Nut, Self-Locking 5/8 - 11 does this seem right?
 

MESHL57492

New member
19
0
0
Location
WILLIAMSPORT PA
I bought all grade 8 stuff I have a hardware surplus store down the road they are almost 1/2 the price of the big box stores. I wouldn't go and use cheap stuff to bolt the landing gear to the trailer. That is just asking for trouble
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks