HELP with glow plug issues

[trooper632]

Hello all, new to the forum. After reading some of the posts, this is the issue. checked each glow plug with test light, and each one lights up. Now I just put a new ford gpr109 on the m1009 and after the key is turned on, the small blue and orange wires are showing they are getting power but nothing to the glow plugs and the wait to start light will not illuminate. any help would be appreciated. also it appears that there are no fusable links that are burnt. thanks donny

 

[CCATLETT1984]

on that new relay you put in, do you hear a click when you turn the key to run? the blue wire should not have power, its a ground (the controller switches the ground to activate the plugs, as the power wire is ignition hot.)

 

[trooper632]

no click when the key is turned on, the blue wire nor the small orange wire have power when the key off. when the key is turned on both the blue wire and the orange wire are hot. no wait to start light ever comes on. the controller under the dash is there but there is nothing plugged into it, I assume that is where the CARD would go, but nothing is there.

 

[CCATLETT1984]

hehe, thats your issue. you need the card

 

[trooper632]

ok thanks, now local napa dealer has no idea what i'm talking about, where do i get them

 

[CCATLETT1984]

its a military only part, http://www.flmv.net/FLMV-CUCV.htm
01-199-1579
SWITCH ASSY GLOW PLUG CUCV (GLOW PLUG CARD WITH HARNESS )
$149.50

You dont need the harness, I'm sure others will chime in on where you can purchase just the card.