• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

I have joined the club ! And yes I have lost my mine !

1951M1078

Well-known member
1,018
184
63
Location
Glendale,AZ
Worked from 100% grade and the 2 to 1 will help with the brake. But its a good point. Its the difference of a winch and a hoist.
But I think I'm good.
 

ramdough

Well-known member
1,554
1,727
113
Location
Austin, Texas
Quick Release Pins . ? From my tool box and a old race boat project.
The quick release pins on your platform.

Again, great work! Just something I have done when I had rattles. It prolongs the hole and pin tolerances too, so they don’t egg over time.


Sent from my iPhone using Tapatalk
 

coachgeo

Well-known member
4,929
3,314
113
Location
North of Cincy OH
Now, THERE'S a "Jeopardy" game show question that would stump 'em all!!
if a person has lived out west for a while........ they might get that answer right. Lake Powell is HUGE while mostly in Utah... it peeks into AZ. Storing boat in AZ is likely more popular than in UT maybe.... would explain the high AZ ownership listings.
 
Last edited:

1951M1078

Well-known member
1,018
184
63
Location
Glendale,AZ
Just a note. I can fold the end section ,OK. But I almost can't do the two. I'm old. But will work on a chain system to help with that using the winch.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks