• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

INI Power Systems IG1000-ICMF Info

Piatheem

New member
14
2
3
Location
California
I did a spontaneous purchase of INI Power Systems IG1000-ICMF. I’m a little confused on what fuel it’s supposed to run on. The internet says it can run on anything. The label says JP-8 only. Can I run it on diesel? It did start for me after several tries, but it smokes a lot. Anyone knows what might be the issue?
 

Attachments

Coug

Well-known member
Steel Soldiers Supporter
3,089
4,602
113
Location
Olympia/WA
I did a spontaneous purchase of INI Power Systems IG1000-ICMF. I’m a little confused on what fuel it’s supposed to run on. The internet says it can run on anything. The label says JP-8 only. Can I run it on diesel? It did start for me after several tries, but it smokes a lot. Anyone knows what might be the issue?
Most things that run on JP-8 will run just fine on diesel fuel. Diesel isn't quite as clean as JP-8, but that usually isn't an issue for most engines.

If it were mine I would start putting a load on it and see if it runs any better. Diesel engines like to run hot to properly burn the fuel, so put as much load on it as it runs well with, run it a while and see if it cleans up.
 
Top