• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Injector pump rebuild instructions

superburban

Member
484
5
18
Location
SL,UT
Does anyone have a manual or PDF on how to rebuild a stanadyne injector pump? I have a bunch of spares laying around in my garage, and I thought I would try my hand at rebuilding.

And I am aware that it requires "specialty stanadyne tools". Not a big deal.
 

peyton

Member
69
10
8
Location
houston, tx
superburban said:
Does anyone have a manual or PDF on how to rebuild a stanadyne injector pump? I have a bunch of spares laying around in my garage, and I thought I would try my hand at rebuilding.

And I am aware that it requires "specialty stanadyne tools". Not a big deal.
Don't know if this is what you are looking for or not but the TM9-2815-237-34 tech manual has a large section on repairing and calibrating the fuel injection pump. It can be found here in the resources section under tech manuals. Good luck.

Peyton
 

peyton

Member
69
10
8
Location
houston, tx
superburban said:
Little note:
TM9-2815-237-34 is just an exploded view parts list, but it is, indeed, helpful.
I'm glad that you found it somewhat helpful even tho it didn't have the detail you were looking for. Knowing very-little-to-nothing about IP's, the IP sections seemed fairly complete to me. For example, the section on IP calibration is over 30 pages long with fairly explicit directions. Good luck with your project.

Peyton
 
Top