• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Intermittent starting problem

OL AG '89

Member
743
9
18
Location
Kingwood, Texas
My 1009 has developed an intermittent starting problem.... The "wait light" fails to come on every once in a while....... It also flickers on and off while driving down the raod, over bumps mainly.
I have confirmed that when the light is not on the glowplugs are not getting power....


When the light fails to come on I can usually crank a couple pf times and then it works.... but sometimes I find myself just sitting for awhile until the gremlins leave the system.

I have started to trace wires in the engine compartment, but not really sure where to start......
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,247
1,168
113
Location
NY
Pull the GP controller card out and clean the contacts with a pencil eraser.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,775
227
63
Location
OKC, OK
Download the -20 manual and follow the Glowplug troubleshooting section. Paragraph 15, page 2-62.

This will give you a good starting point.
 
Top