• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Is it too heavy?

Green Toys

Member
53
2
8
Location
Florida
Ok so I know that these trucks will move the world, but I am going about 30 miles to go get a cat 312 excavator, the total weight will be about 58,500. I hope it will run at least 50MPH. Should I try it or use a different truck, My 5 ton has overdrive with 395's on it. I love the truck but dont want to blow it Up!
 

area52

Active member
1,950
5
38
Location
San Bernardino CA
What truck do you have? Tractor? or what??? Does the trailer ( I assume the excavator is on a trailer) have brakes that will work with your truck?

Pretty vague post - need more info.
 

Scout

Member
94
4
8
Location
Scottsville, NY
Yeah - but he said "tag trailer" which I would assume to be pintle hook, not 5th wheel. That's a lot of weight for that setup - you could have 20-30,000 lbs of tongue weight. If the machine is roughly 60k, and the trailer probably is in the 10k range - figure 2/3 of the load on the trailer axles and 1/3 on the truck, 70/3 = 23,000 lbs. I think you're pushing it.
 

Green Toys

Member
53
2
8
Location
Florida
All good tips, I live in central Florida, it flat. The truck and trailer both have very good brakes, I have a class A licence, with quite a bit of experience transporting. My avatar pic me pulling my mud truck, an ex-military 20k lbs mb23 aircraft tug. It pulled it ok on. My gooseneck trailer, w/electric brakes.
 

Green Toys

Member
53
2
8
Location
Florida
Jasonjc, I have heard that before, I figure ill be fine as long as don't pump the pedal, I have pulled a 50 ton lowboy, with out the pressure dropping. It was empty but still 20k. It pulled, and stopped great, it was able to lock up the tires.
 

Scout

Member
94
4
8
Location
Scottsville, NY
Yeah - but he said "tag trailer" which I would assume to be pintle hook, not 5th wheel. That's a lot of weight for that setup - you could have 20-30,000 lbs of tongue weight. If the machine is roughly 60k, and the trailer probably is in the 10k range - figure 2/3 of the load on the trailer axles and 1/3 on the truck, 70/3 = 23,000 lbs. I think you're pushing it.
I read that as the MACHINE being almost 60k, a Cat 312 is half that - you'll be fine. I've hauled almost 40k of hay on and behind my 813.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks