• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Looking for #10 (i think) hot wire on M35a2

JOECOOL48

Member
103
0
16
Location
Fitzgerald, GA
Could someone tell me what general area I need to look in to find a #10? hot wire located toward the rear of the vehicle. I would like to tap into it to run work lights in the rear of the truck. I found one that goes to the horn, but am hoping there is one toward the rear. Before doghead tells me to read the tm's --I have for the last 4 hours. and searched threads for another hour.
Thanks.
joe
 

319

Lieutenant
Steel Soldiers Supporter
3,348
49
48
Location
Michigan
It's probably just on the tractor version. According to a schematic I have, there is an auxiliary power lead, #37, on tractors. If present, it should be pin "K" of the trailer connector. The schematic does not indicate wire size.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,247
1,168
113
Location
NY
There isn't one near the rear.

Best plan is to run a new wire back to where you need it.
 
Top