CycleJay
New member
- 1,433
- 7
- 0
- Location
- Marietta, Ga
Hi Guys,
I did the Doghead mod tonight, and now my M1009 starts, runs,
and drives just fine.
But while coming back from a test drive to see how well that worked.
All my lights inside and out went out unexpectedly..
(or it might of happened after hitting a speedbump here at home)
When I shut it off and restarted it, the only lights that did come on,
are the lights on the instrument panel that normally come on when
you start it.
I have checked all the fuses, and they all look fine,
most are fairly new anyway, since I replaced them months ago,
since they all looked very old.
What should I check first to get these working?
Thank you,
CJ
I did the Doghead mod tonight, and now my M1009 starts, runs,
and drives just fine.
But while coming back from a test drive to see how well that worked.
All my lights inside and out went out unexpectedly..
(or it might of happened after hitting a speedbump here at home)
When I shut it off and restarted it, the only lights that did come on,
are the lights on the instrument panel that normally come on when
you start it.
I have checked all the fuses, and they all look fine,
most are fairly new anyway, since I replaced them months ago,
since they all looked very old.
What should I check first to get these working?
Thank you,
CJ