• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M146 RV Conversion

RAYZER

Well-known member
3,380
58
48
Location
sanford/florida
Finally getting around to upgrading the air conditioner!
The 8000 btu unit that was initially installed just wasn't enough to cool the back area of the trailer on a hot day.
The new unit installed is a 12000 btu "casement window"
Unit, it's taller than it is wide so to still fit between the front wall upright studs; a standard 12k btu unit would have been too wide.
What a huge difference the extra btu's make!
Now I can kick back and take a Knapp in extreme comfort!
uploadfromtaptalk1430260321958.jpguploadfromtaptalk1430260367651.jpguploadfromtaptalk1430260401331.jpguploadfromtaptalk1430260549905.jpguploadfromtaptalk1430260572807.jpguploadfromtaptalk1430260592808.jpg
 

RAYZER

Well-known member
3,380
58
48
Location
sanford/florida
I've been working on the generator and box install over the past few weeks, the hard part is done!
The box is 11 gauge steel that I had a local shop bend up, measurements are 48" X 24" X 28" l w h.
Next, I'll pull it all back down and take the box over to QUADJEEPER's house to have him cut some holes with his plasma cutter and finish the welding!
uploadfromtaptalk1433118843779.jpguploadfromtaptalk1433118871300.jpguploadfromtaptalk1433118933398.jpguploadfromtaptalk1433118933398.jpguploadfromtaptalk1433118965211.jpg
 

Attachments

Top