Fastfunco
Member
- 55
- 0
- 6
- Location
- Mohave valley , Arizona
This has been a long long project and you guys have helped alot. Just wanted to say thank you very much and I have 1 more question-
On top of the hood are 2 latches- what belongs on top of the hood that these would fasten down?
I will post final pictures in a couple days once its out of my shop - in the sun for the first time- shop light prohibit me getting pictures that are any good-
obviously these are of my 925 i just added M66 ring and Ma Duece- this one is a dummy!!
thought i would post while im waiting for files to download- this M925-A2 had a frame off restoration by the military in 2011- everything is brand new except the frame - the plate on the 8.3 turbo reads 11-2011
I did not like the mounts that came with the ring- so I made a 4 post mount that slips on and off with a forklift- thought that would be alot easier to swap guns and ammo cans- as well as be alot stronger -- it holds 10 cans of ammo
here is the 944- its all original - only had 500 miles on it when i bought it - mill- lathe- press- Mig, Tig, Plasma, generator, air compressor- all run off the PTO or shore power!!
OH I FORGOT TO TELL YOU-- I FOUND THE CANVASES THAT MAKE UP THE OUTER TENT WHEN THE SHOP DOORS ARE OPEN-- ALL OF THEM- IN A TRAILER VERSION OF THIS SHOP TRUCK- ALL FOLDED AND IN THE COMPARTMENT - UNDISTURBED SINCE THE DAY THEY BUILT THE TRAILER IN 86- WHAT A HUGE FIND- I HAD BEEN SEARCHING COAST TO COAST FOR 3 YEARS!!!
so I will set up the shop as it was intended for the final pictures before we take her out and drive the ---- out of it!!
sure would like to get whatever belongs on the hood- you can see the brackets in the picture- attached thumbnail-
thanks again to all who helped me-- i really do appreciate you guys and this site!!!
.
On top of the hood are 2 latches- what belongs on top of the hood that these would fasten down?
I will post final pictures in a couple days once its out of my shop - in the sun for the first time- shop light prohibit me getting pictures that are any good-
obviously these are of my 925 i just added M66 ring and Ma Duece- this one is a dummy!!
thought i would post while im waiting for files to download- this M925-A2 had a frame off restoration by the military in 2011- everything is brand new except the frame - the plate on the 8.3 turbo reads 11-2011
I did not like the mounts that came with the ring- so I made a 4 post mount that slips on and off with a forklift- thought that would be alot easier to swap guns and ammo cans- as well as be alot stronger -- it holds 10 cans of ammo
here is the 944- its all original - only had 500 miles on it when i bought it - mill- lathe- press- Mig, Tig, Plasma, generator, air compressor- all run off the PTO or shore power!!
OH I FORGOT TO TELL YOU-- I FOUND THE CANVASES THAT MAKE UP THE OUTER TENT WHEN THE SHOP DOORS ARE OPEN-- ALL OF THEM- IN A TRAILER VERSION OF THIS SHOP TRUCK- ALL FOLDED AND IN THE COMPARTMENT - UNDISTURBED SINCE THE DAY THEY BUILT THE TRAILER IN 86- WHAT A HUGE FIND- I HAD BEEN SEARCHING COAST TO COAST FOR 3 YEARS!!!
so I will set up the shop as it was intended for the final pictures before we take her out and drive the ---- out of it!!
sure would like to get whatever belongs on the hood- you can see the brackets in the picture- attached thumbnail-
thanks again to all who helped me-- i really do appreciate you guys and this site!!!
.
Attachments
-
39.2 KB Views: 45