Mechanical Oil Pressure Gauge

[DuecesWild]

Hey guys im gonna be installing a mechanical SW 100psi oil pressure gauge (and keeping the stock one also) and was wondering if there was any other spot on the block i can put the sending unit besides the factory spot. Thanks.

 

[jfnemt1ff1]

I put mine at the filter, I removed the valve and used that hole.
John

 

[Nonotagain]

Hey guys im gonna be installing a mechanical SW 100psi oil pressure gauge (and keeping the stock one also) and was wondering if there was any other spot on the block i can put the sending unit besides the factory spot. Thanks.

Why not just install a "T" fitting and have the manual gage in one side and the electronic on the other?

 

[1stDeuce]

When I got my deuce, the electrical gauge was a 60psi, while the sender was 120, and they didn't agree at all... I bought another air press gauge off epay and plumbed it in where the electrical gauge was. Works perfect, looks stock, and never lies.
C

 

[DuecesWild]

Why not just install a "T" fitting and have the manual gage in one side and the electronic on the other?

I was gonna do that and I might still put it there. Im just looking at my options.