- 1,180
- 164
- 63
- Location
- Marietta, Georgia
MEP 002 Injection Pump Part REVISED
My MEP002 has sulked and refused to run at this months maintenance interval.
Inspection indicated that no fuel to the injectors, plenty of fuel and pressure entering the IP, no fuel out.
On further inspection the delivery valve spacer (item 6 on the illustration) is folded and torn. Most like been that way all its life and just now acting up.
What I think I need it one of these spacers, or a lead on finding one.
Or some direction on what else may have happened or where else I should look.
Any help will be GREATLY appreciated.
Pump is delivering NO fuel, rigged the damaged part, no good.
Anyone got a good way to check these pumps or do I just need to remove it an plan on a replacement?
Looking for that experience, I have none on these little engines.
My MEP002 has sulked and refused to run at this months maintenance interval.
Inspection indicated that no fuel to the injectors, plenty of fuel and pressure entering the IP, no fuel out.
On further inspection the delivery valve spacer (item 6 on the illustration) is folded and torn. Most like been that way all its life and just now acting up.
What I think I need it one of these spacers, or a lead on finding one.
Or some direction on what else may have happened or where else I should look.
Any help will be GREATLY appreciated.
Pump is delivering NO fuel, rigged the damaged part, no good.
Anyone got a good way to check these pumps or do I just need to remove it an plan on a replacement?
Looking for that experience, I have none on these little engines.
Attachments
-
16.8 KB Views: 51
Last edited: