Gudge2
New member
- 18
- 0
- 0
- Location
- Seattle, WA
I posted about a year ago and want to thank those who responded. Unfortunately the mystery continues. Short recap: I can't get it to crank, using the switch. I replaced the starter/solenoid. Still nothing. I checked the lock out switch, it is closed and I jumped it, several times. No change. As some suggested I checked the oil pressure switch. No issue there. I followed the power from the switch to the K3 relay. I've got power at the bottom terminal, non at the top. I can start the generator by either using a trigger switch with leads attached to to starter and solenoid or by taking the cover off K3 relay and pushing it to make contact.
Shouldn't K3 be getting power to both top and bottom lead and what would interfere with the top connection?
Next time I can I'll check connections to the diode behind K3 but I'm not hopeful that's the issue.
Any guidance? Thanks in advance.
Shouldn't K3 be getting power to both top and bottom lead and what would interfere with the top connection?
Next time I can I'll check connections to the diode behind K3 but I'm not hopeful that's the issue.
Any guidance? Thanks in advance.