My first multifuel?

[foxtrot]

 

[foxtrot]

A day without !
A badly damaged master cylinder.
I lubricated and adjusted the parking brake, however the lever in the cockpit remains inoperative.
The cable must be broken.
I still had fun though.

 

[foxtrot]

A holiday feeling.

 

[foxtrot]

I just finished the reassembly.
I poured engine oil and filled the steering reservoir.

 

[foxtrot]

Fuel not getting to ejectors.
Valves close to the first cylinder,
mark on the crankshaft damper and
timing mark on the hub,
the marked tooth was not visible
in the inspection mirror.

 

[foxtrot]

Pump head reassembled I still have no fuel at the ejectors.
Passing through the density compensator, the flow at the inlet of the pump head is strong.

 

[HDN]

Pump head reassembled I still have no fuel at the ejectors.
Passing through the density compensator, the flow at the inlet of the pump head is strong.

How did you verify that? Hook a drill up to it and run some diesel through?

 

[foxtrot]

How did you verify that? Hook a drill up to it and run some diesel through?

I checked with the pump head reassembled on the engine.
Pump running and starting.
Nothing happens to the ejectors.
I disassemble the head again for a more thorough cleaning.

 

[HDN]

I think I was confusing injector pump with fuel pump. Hope you figure out what's happening at the injectors!

 

[foxtrot]

A question on the third photo, is something missing, a cork?

 

[foxtrot]

I am posting this message to inform you that tonight August 29, 2022 my truck engine is working.
It starts right away, with a pleasant sound.
Tonight, I'm going to have a beautiful dream.

 

[US6x4]

Awesome! Please post a short startup video if you can. We would love to hear it purr

 

[foxtrot]

Awesome! Please post a short startup video if you can. We would love to hear it purr

Yes, for a video, however the priorities are:
- Water leak at the oil cooler, probably the gasket.
- Leak in an expansion plug on the second cylinder head, it blew on the manifold side.
- Fuel leak at the valve assembly on the heater.
- Exhaust.

 

[foxtrot]

Tomorrow everything will be reassembled.
I should be able to take care of the water leak at the oil cooler.
The power steering seems efficient (felt at the wheel) I haven't tested it yet.

 

[foxtrot]

First rounds of wheels.

 

[m715mike]

@foxtrot - that is a great sound!

 

[foxtrot]

Still a leak at the heater valve.
I unlocked the hinges of the windshield bay and slid the cover.

 

[foxtrot]

Riddle:
With this red recycling metal,
I make a new tool to continue the restore, what is it?

 

[bprzyw]

????

 

[bprzyw]

Transmission stand?