Shark Bait
Active member
The 301 will be the rear camera, the 301c's will be on each side and the 500 will be on the front. I'll have to get the info on the 500 to put on here.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
My HET project
- Thread starter Shark Bait
- Start date
Carlo
New member
That's really simple and good idea. I want to put these on my trucks. Thanks
Shark Bait
Active member
I think I found a mini DVR that uses 8-32 volts DC. It has an SD card slot. The 4 cameras will run in to it then to the 4 channel monitor. It has a locking cover to secure the SD card as well.
Shark Bait
Active member
I don't have a $ figure yet, but this is the DVR specs. It is offered with or without GPS, however, the GPS nearly doubles the $. My rep is going to email me the owners manual to see if its what I want. I would like the recording capability for the simple reason people just don't drive anymore. They text, talk on he phone, do their makeup, read the paper............you all know what I mean. I WANT AN UNBIASED WITNESS. lol
Shark Bait
Active member
I got a little time this weekend to work on my headlight guards. The original guards won't clear the Truck-Lite LED's. I coat them with a couple layers of spray on bed liner then Behr for the green and Rustoleum flat black where needed. I managed to get time today to bolt them on. Still have a few things to do but you get the ideal. The back plate will stay mounted and the guards will simply un bolt from them on top and bottom to service lights if need be.
Attachments
Last edited by a moderator:
Shark Bait
Active member
I found it easier to work on if the truck is on its side. Lol.
auctionaddict
Member
Easier to reach the headlights !!
Nice work !!
Oldworldtenacity
Member
Top notch fabrication as usual. They look like they were meant to be for the HET.
Shark Bait
Active member
I finally got some of my cameras installed this past weekend but forgotten o take pictures outside in the daylight. Sorry, I haven't finished this end of the garage yet to have lights up.Dave
Shark Bait
Active member
Another Ahab
Well-known member
Those trusses look like they're on 4 foot centers. Am I seeing that right?
Another Ahab
Well-known member
Is that a hot-rod deuce you're building, Shark Bait!?
Shark Bait
Active member
Yes, they are on 4' centers. 2x8 top beam and 2x6 lower. Building is 50' wide with 12" over gang and 120' long with 16' ceilings. A second floor was added to part of it for an additional 1,000sq feet.
Shark Bait
Active member
No projects going on presently besides trying to get time to finish the building itself. I've got some ideals of some things but it'll be on down the road if I do.
Dave
Another Ahab
Well-known member
I like the lighting:
- "Bright is Right!"
- "Bright is Right!"
Shark Bait
Active member
We did over 100, all with twin Sylvania daylight bulbs. I like lighting too and still want more.
Shark Bait
Active member
There are trigger wires for left turn signal, right turn signal and reverse light to activate monitor to that channel. It wasn't a kit, they are units we put together for clients we do installations for. The models are in this thread, if need a supplier you can PM me.
Dave