Dmaxcc6spd
Member
- 54
- 0
- 6
- Location
- KY
I searched the forums, but had too many results to be useful, so forgive me for beating the dead horse.
My recently acquired M925 could benefit from some better cranking speed. I'm still sorting out the batteries and cables, but they should be OK.
From what I have learned, it seems the engine was filled with SAE 30 oil by the govt. Is this likely?
I am planning to go with the traditional 15W40 which should hopefully flow better in the cold and promote easier cranking. I could do the 5W40, but that is really expensive.
Thoughts for the newb?
Thanks guys - I have much to learn!!
My recently acquired M925 could benefit from some better cranking speed. I'm still sorting out the batteries and cables, but they should be OK.
From what I have learned, it seems the engine was filled with SAE 30 oil by the govt. Is this likely?
I am planning to go with the traditional 15W40 which should hopefully flow better in the cold and promote easier cranking. I could do the 5W40, but that is really expensive.
Thoughts for the newb?
Thanks guys - I have much to learn!!