soulbrojosh
Member
- 30
- 0
- 6
- Location
- albion, mi
After installing my new oil cooler lines i noticed that the aluminum ends are rubbing against the trans shift linkage, does anyone have any advice on how to fix this?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Oil Cooler line leak...
- Thread starter KiefOlsen92
- Start date
unaffiliated
Member
- 394
- 11
- 18
- Location
- Coosa, Georgia
I bought mine from Advance auto parts. I had to modify the bracket that bolts to the exhaust by drilling another hole and moving the clamp that secures the lines. I also had to reshape the lines (very carefully) to keep them away from stuff.
usmcpatriot
Member
- 199
- 14
- 18
- Location
- Bumpass, VA
Same problem, I cut hose and wrapped the contact spot. Problem solved, three inches of hose. Thats it bro.
M1009 NEWBEE 2013
New member
- 164
- 0
- 0
- Location
- Colorado
Very helpful/useful info. Thanks all! It sure beats a posting about researching stickys and/or TM's for those looking for a quick #. I am going to replace mine soon, I noticed a little oil residue and the rubbing issue after reading this thread and im sure its just a matter of time. Very helpful thread!