Racing Seats and Seat Brackets

[mcne2026]

I am looking to install some racing seats that allow me to use a 5 point harness. I am installing a S&M Roll Cage also. I would like to retain the factory seat brackets to make the install easy. When I look at the brackets, the rear are lower and use an arm to the slider to make then level with the front. I have included a link to the seats I want. What do you think I will need to mount these sliders and seats to our brackets?

http://www.hunsakersports.com/shop/item.asp?itemid=194

 

[BKinzey]

I've got a better suggestion. If you are going with a roll cage have cross bars made up and mount your seats to that.

I'm mounting different seats in mine and matching them up is a pain!

 

[CCATLETT1984]

I would recommend the cross-bars as well, I not then I would at least use the sliders that came with the seats and make a braket to mount them to the truck.

Please remember not to mount the roll cage to the body of the truck (GO TO THE FRAME)

 

[85-m1028]

for that price I'd just go with some Mastercraft sportsman seats www.mastercraftseats.com these seat are much more comfortable and they can help you with the mounting ! just my .

 

[mcne2026]

They only have one reclining seat and it does not have an application for a Blazer. Plus, it is more expensive than the Hunsacker.

I found a company, Wedge Manufacturing in Long Beach, that makes a replacement bracket for the CUCV. They make it to order and will customize the top to fit any seat. You just send them the bolt pattern and dimensions. Only $75 per bracket. Not a bad price at all.

 

[85-m1028]

Ohh, for some reason I had it in my head that you were putting them in a pickup. the one reclining seat they have is really nice "thought about putting em in my jeep" but they are a bit more$$. Still if I had my druthers I'd go mastercraft all the way something about the way conform around you and have that little bit of cushy give over bumps

 

[CCATLETT1984]

They only have one reclining seat and it does not have an application for a Blazer. Plus, it is more expensive than the Hunsacker.

I found a company, Wedge Manufacturing in Long Beach, that makes a replacement bracket for the CUCV. They make it to order and will customize the top to fit any seat. You just send them the bolt pattern and dimensions. Only $75 per bracket. Not a bad price at all.

do you have any more contact info for this company?

 

[ONTOS66]

Sounded interesting, I'd like to change the seats in my M1009 too. I did a Google and found this:

2031 E Cherry Industrial Cir
Long Beach, CA , 90805-4409
Address Map
Phone: 562-633-1663

Products Description:
Manufactures automobile seats

Is that the correct company?

 

[ONTOS66]

Oooops left off the company name:

It is listed as Wedge Engineering

Must be getting old.

 

[mcne2026]

http://www.wedgeengineering.net/Home/tabid/5426/Default.aspx

That is the link. Website is no good, but has his phone number. He is a little grumpy on the phone but will make you a good product.