BadAmish
Member
- 67
- 66
- 18
- Location
- Grants Pass, Oregon
I am baffled on the routing of some of the radio cables I am trying to remove. Maybe someone here can enlighten me.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Radio Cable Routing Questions
- Thread starter BadAmish
- Start date
BadAmish
Member
- 67
- 66
- 18
- Location
- Grants Pass, Oregon
It seems there is a space between the floor of the HMMWV that I cannot see from under the HMMWV.
- 10,897
- 7,506
- 113
- Location
- Camp Wood/LC, TX
Must be going through the B Beam.
- 7,534
- 10,579
- 113
- Location
- Papalote, TX
They may be cut under the insulation mat before they come out and join the power cables behind the doghouse, those might be coax for the radios.
BadAmish
Member
- 67
- 66
- 18
- Location
- Grants Pass, Oregon
It feels like they may be connected to something inside / under the floor / deck.
- 5,772
- 3,205
- 113
- Location
- Metairie/La (N'awlins)
Could be connected to the shunt under the truck by the battery. Typically they have large grommet with a flange to protect the wire when they drill through panels.
BadAmish
Member
- 67
- 66
- 18
- Location
- Grants Pass, Oregon
Is this the shunt?
I forgot that I have a borescope that I got a few years ago to look inside a wall to see where some wires were going. I am charging it and, weather permitting, see if I can see what is going on inside that channel.
I forgot that I have a borescope that I got a few years ago to look inside a wall to see where some wires were going. I am charging it and, weather permitting, see if I can see what is going on inside that channel.
- 5,772
- 3,205
- 113
- Location
- Metairie/La (N'awlins)
Yes, that is one but there is another underneath the truck close to the starter and only visible from underneath along the frame.