kcimb
Well-known member
- 1,336
- 212
- 63
- Location
- Fort Worth, Texas
I think in the end I'll probably go with a 366 gas engine and an at545 from a Chevy/gmc dump or box truck. Anyone had any comments on that combination?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Replacement engine for a brdm2
- Thread starter kcimb
- Start date
kcimb
Well-known member
- 1,336
- 212
- 63
- Location
- Fort Worth, Texas
Bump
WARWAG
Active member
- 1,487
- 22
- 38
I would just use a nice Chevy 383. Have an adapter plate made and call it good.
panzerwillie
Active member
- 962
- 110
- 43
- Location
- miami florida
Why not a 6.5 turbo diesel and a turbo 400 combo , good power easy fit and reliable tb400 i use that combo on our M5A1 runs good....
kcimb
Well-known member
- 1,336
- 212
- 63
- Location
- Fort Worth, Texas
Ive had plenty of bad experiences with the 6.5 in humvees. Not sure how the 400 would hold up with 16k pounds behind it.
panzerwillie
Active member
- 962
- 110
- 43
- Location
- miami florida
I used it in many applications from tank to half track including my OT-810 {8-tons} with a turbo 400 manual shift, they are very strong and have good reputation,as far as the 6.5L i use them a lot the newer blocks are better and if you used it smart it will give you endless hours of service, however there many other choices good luck...