Replacing NP218

[FreetheHumvee]

Hey all, I just picked up a 1988 M998. The NP218 transfer case is cracked and needs to be replaced. I am looking to swap in an NP242 or similar (NP205? ). The truck has the 6.2 diesel with TH400 tranny. Looking to make this as simple as possible but open to an upgrade.

I have read that a NP242 was produced to bolt up to the 3speed TH400 as a replacement for the NP218 (using existing driveshafts). Can this be sourced? Thoughts? Thank you for your help!

 

[Retiredwarhorses]

THe 242 uses new drive shafts....also, there are 2 models of 242 TC's....and that will dictate what drive shafts you will use.
also, the diff pinion yoke will need to be changed if you have the old style e-brake version.
you best easiest bet is to replace with another 218....

 

[Action]

I have a spare 218. I was told it was rebuilt before I got it. No cracks and turns smooth.

 

[linhster]

Getting ready to pull my 218 and the th400 out. Let me know if you are interested. Hopefully you are near by and can pick it up.

 

[Action]

You can have my 218 for 105 + shipping + wood

 

[benalco1]

Action - Do you still have your 218 transfer case?... if so, where are located?

You can have my 218 for 105 + shipping + wood

 

[Action]

Cape Coral. not too far away.