• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rust proofing & protection

Unionjackjim

Member
57
0
6
Location
Kent , UK
Just a thought .

As the chassis rails are open either end & are sealed front to back , how do you guys get the water & sand out of the chassis & rust protect , to prevent internal corrosion .

answers on a post card :?
 

86humv

Well-known member
Steel Soldiers Supporter
1,696
498
113
Location
Texas
They drilled holes in lower section of frame.....one forward, and one aft.
I saw a frame this way with 1/2' holes.
Mine had the holes, so I washed it out with a hose / water from the front , and from the holes....washed out some dirt and stuff.
 

86humv

Well-known member
Steel Soldiers Supporter
1,696
498
113
Location
Texas
The A2's have small drain plugs/screws on the lower inside frame rails, and the front of the rails have blocking plates.
 
Top