• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rust proofing & protection

Unionjackjim

Member
57
0
6
Location
Kent , UK
Just a thought .

As the chassis rails are open either end & are sealed front to back , how do you guys get the water & sand out of the chassis & rust protect , to prevent internal corrosion .

answers on a post card :?
 

86humv

Well-known member
Steel Soldiers Supporter
1,696
498
113
Location
Texas
They drilled holes in lower section of frame.....one forward, and one aft.
I saw a frame this way with 1/2' holes.
Mine had the holes, so I washed it out with a hose / water from the front , and from the holes....washed out some dirt and stuff.
 

86humv

Well-known member
Steel Soldiers Supporter
1,696
498
113
Location
Texas
The A2's have small drain plugs/screws on the lower inside frame rails, and the front of the rails have blocking plates.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks