This is for all the guys that use bolts,roll pins,hair pins or any other item not a shear pin. This what could happen.I spoke with Memphis Equipment today,they said this is the most common part that they sell for winch repair.$311.00 plus shipping buys alot of shear pins. I bought this used, and it had an old style yoke on it with a roll pin in it.anybody have a good used gear around?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Shear Pins do Work!
- Thread starter derby
- Start date
- 574
- -21
- 18
you think $311 is bad, i had a friend use a bolt once and he didnt break the bull gear, but rather the u joint broke at the winch end and the shaft started flailing around and managed to take out his radiator. water was coming out faster than you could fill it
ida34
Well-known member
- 4,117
- 30
- 48
- Location
- Dexter, MI
Derby,
I might have extra parts but I have to go through my winch before I sell the spare one. I will not get to checking the winch out until middle of summer at the soonest. I can drop you a line when I get done to see if you still need it. I might be able to get to it sooner but the daily drivers have been taking my time lately.
Chuck
I might have extra parts but I have to go through my winch before I sell the spare one. I will not get to checking the winch out until middle of summer at the soonest. I can drop you a line when I get done to see if you still need it. I might be able to get to it sooner but the daily drivers have been taking my time lately.
Chuck
- 34,014
- 1,814
- 113
- Location
- GA Mountains
Check with Steel Soldiers, I have a parts winch at his place.
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
I have genuine deuce aluminum shear pins with the two cotter pins: $4.00 each plus a few dollars for a padded envelope and stamps. No extra shipping for more than one pin.
E=mail: joeyounginc@aol.com
SOLD OUT! Beware of some pins offered for sale. I got a steel clevis pin from Memphis before I lucked into the real ones.
E=mail: joeyounginc@aol.com
SOLD OUT! Beware of some pins offered for sale. I got a steel clevis pin from Memphis before I lucked into the real ones.
akrhino
New member
- 35
- 0
- 0
- Location
- copper center ak
I just replaced the bull gear in my 35 it was trashed when I got it all the teeth were ground off I think I got mine from spruce mt about 300.00 then had to ship it to Alaska not cheap also got a pack of shear pins at the same time wont make that mistake what were you winching and how hard were you winching when that happened
joec
New member
- 787
- 1
- 0
- Location
- Vincentown,NJ
Re: RE: Shear Pins do Work!
Thanks for the Pins and Tow Bar and other parts Joe. Great doing business with you.
You are a great guy to deal with!!!!
Thanks
Joe C
MVtrucker said:
Thanks for the Pins and Tow Bar and other parts Joe. Great doing business with you.
You are a great guy to deal with!!!!
Thanks
Joe C
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
RE: Re: RE: Shear Pins do Work!
Hey, you are a great customer! I work good deals with non-bs people.
I uncovered a lot more parts after you left; maybe ya wanna stop back?
And thanks very for being a man of yourword.
Hey, you are a great customer! I work good deals with non-bs people.
I uncovered a lot more parts after you left; maybe ya wanna stop back?
And thanks very for being a man of yourword.
joec
New member
- 787
- 1
- 0
- Location
- Vincentown,NJ
Re: RE: Re: RE: Shear Pins do Work!
MORE STUFF.....?
MVtrucker said:
MORE STUFF.....?
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
RE: Re: RE: Re: RE: Shear Pins do Work!
The more I snoop thru my sheds, the more I find. I'm compiling a list and will post it as soon as I can.
The more I snoop thru my sheds, the more I find. I'm compiling a list and will post it as soon as I can.
joec
New member
- 787
- 1
- 0
- Location
- Vincentown,NJ
RE: Re: RE: Re: RE: Shear Pins do Work!
Cool cant wait!!!
Cool cant wait!!!
- 34,014
- 1,814
- 113
- Location
- GA Mountains
RE: Re: RE: Re: RE: Shear Pins do Work!
Joe, you know we have a sick addiction, post yer list, we'll buy the stuff. Did you deplete your inventory of headlights already?
Joe, you know we have a sick addiction, post yer list, we'll buy the stuff. Did you deplete your inventory of headlights already?
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
RE: Re: RE: Re: RE: Shear Pins do Work!
Just read your Post, Kenny. I'm out of headlights. Haven't had any for a while. I have two boxes that I thought were headlights, but they're M35A2 NOS metal front lights.
Just read your Post, Kenny. I'm out of headlights. Haven't had any for a while. I have two boxes that I thought were headlights, but they're M35A2 NOS metal front lights.
ygmir
New member
- 300
- 0
- 0
- Location
- northern CA
RE: Re: RE: Re: RE: Shear Pins do Work!
My deuce has a shear pin size that seem different. It's 5/16.
does anyone else have that size?
I ordered shear pins, once, but, they were far to large. THey were correct for someones deuce, just not mine.....
Does anyone have this size?
Thanks,
HEnry
My deuce has a shear pin size that seem different. It's 5/16.
does anyone else have that size?
I ordered shear pins, once, but, they were far to large. THey were correct for someones deuce, just not mine.....
Does anyone have this size?
Thanks,
HEnry
ygmir
New member
- 300
- 0
- 0
- Location
- northern CA
RE: Re: RE: Re: RE: Shear Pins do Work!
or,
can someone tell me the alloy so I can buy stock and make my own?
THanks again,
Henry
or,
can someone tell me the alloy so I can buy stock and make my own?
THanks again,
Henry
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
RE: Re: RE: Re: RE: Shear Pins do Work!
5/16" sounds right. I can't check because after my above Posting, I sold out.
5/16" sounds right. I can't check because after my above Posting, I sold out.
emr
New member
- 3,211
- 24
- 0
- Location
- landing , new jersey
RE: Re: RE: Re: RE: Shear Pins do Work!
You had 5 ton pins, 5/16 is correct. randy
You had 5 ton pins, 5/16 is correct. randy
- 34,014
- 1,814
- 113
- Location
- GA Mountains
RE: Re: RE: Re: RE: Shear Pins do Work!
There are a couple of folk that know the alloy but it's not been shared. I was going to set out on a mission to find that out but life has been busy.
There are a couple of folk that know the alloy but it's not been shared. I was going to set out on a mission to find that out but life has been busy.
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Re: RE: Re: RE: Re: RE: Shear Pins do Work!
"Found a reference to the alloy for the 260 series 5-ton winch (5315-00-209-7979), it is the 2017, probably -T4 temper, which has a shear strength of 38,000 psi.
It's a start... "
Posted this in a previous thread......Recovry4x4 said:
"Found a reference to the alloy for the 260 series 5-ton winch (5315-00-209-7979), it is the 2017, probably -T4 temper, which has a shear strength of 38,000 psi.
It's a start... "