• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Speaker not speaking in AM-2060

Whiterabbit

Member
744
14
18
Location
Bristol Va.
I'm guessing my amp is belly up.
The radio is working fine (PRC77) and the ant. control is working but no sound from the speaker. Pulled the speaker and with static on the handset I measured .6V at the speaker terminals and total silence.
Can I get the amp replaced and if so, where?? :-? or am I outt'a luck?
Thanks all,
 

Whiterabbit

Member
744
14
18
Location
Bristol Va.
100_3033.jpg100_3034.jpg100_3035.jpg100_3032.jpgBasically it freq. matches the Ant. and has an amped speaker. No sound coming from the speaker but every thing else works. Broadcasts and receives fine. Pulled the speaker out the front and the 2 wires are not broken and have continuity.
 

Whiterabbit

Member
744
14
18
Location
Bristol Va.
Ran through the trouble shooting chart 3-6 itm3 in the 11-5820-489-35. I have audio to the VIC system headphones and the hand held plugged onto the PRC-77 so the amp is good.
Continuity good between pins E12 &14 K1 relay good and speaker switch good.
Continuity good between pins E1 &13 wiring to speaker good.
Going to just guess that the speaker is belly up, frozen in place or something. stone cold silent. I have a replacement speaker coming.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks