atvcat33
New member
- 81
- 0
- 0
- Location
- muskego Wisconsin
ok i had my "nelson" muffler break at both flanges on a trip. got it back home and found some 5" couplers and a stack off a mack truck i have, and made some straght 5" right from the manifold.
was pretty easy, took the flange from the muffler and welded a 4 1/2 to 5" coupler to it and ran some flex and couplers to a 90 and right to the stack. this is VERY LOUD. gurggles pretty good through the gears. louder than a whistler duece by far.
i did not cut or retrofit anything on this. i had a old exhaust flange for the stack and welded the 5" clamp to that. i wouldnt be surprised that i get pulled over for it, i can get a new muffler for $250 but thought i go and straight pipe on it for now.
i will be adding a 290 small cam turbo and jakes this fall, also ill be running 46" singles too. with pics to follow.........
was pretty easy, took the flange from the muffler and welded a 4 1/2 to 5" coupler to it and ran some flex and couplers to a 90 and right to the stack. this is VERY LOUD. gurggles pretty good through the gears. louder than a whistler duece by far.
i did not cut or retrofit anything on this. i had a old exhaust flange for the stack and welded the 5" clamp to that. i wouldnt be surprised that i get pulled over for it, i can get a new muffler for $250 but thought i go and straight pipe on it for now.
i will be adding a 290 small cam turbo and jakes this fall, also ill be running 46" singles too. with pics to follow.........

Attachments
-
25.9 KB Views: 90
-
37.5 KB Views: 87
-
26.3 KB Views: 88
-
37.9 KB Views: 93
-
29.7 KB Views: 94