• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Timing chain and gears, Commercial equivalent?

papakb

Well-known member
2,288
1,186
113
Location
San Jose, Ca
Thank you guys. I was using my 151 to move my 101 trailer around when I heard a bang and it started smoking and running very rough. I thought it might have been due to a timing chain slippage but now I see that probably didn't happen. This evening I pulled the valve cover and everything there looks normal. No broken springs or bent pushrods. I ran a compression check and they all came in around 120 psi so where do I go now? Pull the pack and drop the pan? Could this be a broken crank problem? The clutch and trans still feel normal. Any suggestions would be appreciated.
 

Attachments

Top