MatthewH
Member
- 401
- 3
- 18
- Location
- Boyne City Mi
Okay, his morning on the way to work, the pass head gasket finally went in my M1009, so my question is whether to swap engines or not.
I have an extra 6.2 on a stand, unknown running condition, inside looks good, and i plastigauged it, everything seems in spec, but again unknown condition,
Or
i have a 454 bb from another truck that currently runs and drives.
I'm up in the air on what to do, as I had lots of problems with the old 6.2 and not impressed with the engines themselves, but would be an easy swap, or do i put the 454 in it and live with less mpg's. Eitheway i'm pulling the old engine.
Thoughts/advice appreciated
Thanks
MatthewH
I have an extra 6.2 on a stand, unknown running condition, inside looks good, and i plastigauged it, everything seems in spec, but again unknown condition,
Or
i have a 454 bb from another truck that currently runs and drives.
I'm up in the air on what to do, as I had lots of problems with the old 6.2 and not impressed with the engines themselves, but would be an easy swap, or do i put the 454 in it and live with less mpg's. Eitheway i'm pulling the old engine.
Thoughts/advice appreciated
Thanks
MatthewH