Volt Gauge Mounting Bezel Needed

Steel Soldiers is supported by:

chevymike

Active member
Steel Soldiers Supporter
282
76
28
Location
San Diego, CA
Hi all,

I am working on my custom gauge panel and it would be really helpful if I can get the following piece from someone who has a damaged/cracked bezel. The M1010 I have has an extra hole for the rear door light so I need one from an M1008 or M1009 or model that just has the single gauge in it. I don't need the gauge nor the bezel, so drill out the two rivets and mailing this should be fairly simple/cheap. In the red circle is what I am looking for.

gauge mount_LI.jpg

PM me if you have one and can ship it.

Thanks,
Mike
 

Russm

Active member
194
25
28
Location
Ft. Benning, GA
I moved all my gauges up here, it's just a 1/8" aluminum sheet. If/when I ever add A/C it's going to vent out through that bezel you're looking for.


Sent from my LM-G710 using Tapatalk
 

chevymike

Active member
Steel Soldiers Supporter
282
76
28
Location
San Diego, CA
I thought I would update this thread to show what I was doing with this bezel. This is for some factory indicator lights that are loss with the removal of the factory gauges.

0208201045a.jpg

0208201113.jpg

0208201127_HDR.jpg

0208201434_HDR.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks