texas30cal
Active member
Excellent!! Thanks for the help guys!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
Sorry, I posted the wrong Prothane part #, if your not into the Devo Hat look, 19-1317 looks more like the Mil part.
URSATDX
Member
I removed the LED light bar that came with the truck. It can be easily reinstalled
in a few minutes if I need it for camping, etc. It is 24V and very bright.
I just did not like the way it looked.
Bought some 3M sound deadening pads to experiment with on the interior. (Napa)
Easy to cut and when warmed with a heat gun was easy to install and formed to
the contours of the firewall.
in a few minutes if I need it for camping, etc. It is 24V and very bright.
I just did not like the way it looked.
Bought some 3M sound deadening pads to experiment with on the interior. (Napa)
Easy to cut and when warmed with a heat gun was easy to install and formed to
the contours of the firewall.
Attachments
texas30cal
Active member
Those look very similar to what I used, they work great to reduce noise, the brand I got from Amazon was called noico . It works well on the bottom side of the trans tunnel too!!
what did you do with the field wire? The one that connected to the old alternator with military wiring connector .
Haaaaaaaa a real shorty. Caught it just perfect.leaving work today i caught a pic of the new m109a3 bobber View attachment 723001wasn't trying but after looking at it
vandusen454
Member
It's unused with the one wire alternator .. Folded it back and taped it up in the harness ...
speedfellon
Member
Tracer. Great to hear you project is finished. see you in Petaluma.
Thanks Alan. Alan, it looks like this will be the last year at Petaluma. There are still some issues with parking and the MVCC board found a new place that is more centrally located. Read the latest post from Major Asstyrd. Looks like the new location will be announced at the upcoming April gathering. See ya there.
tobyS
Well-known member
I just caught that....it's cool.leaving work today i caught a pic of the new m109a3 bobber View attachment 723001wasn't trying but after looking at it
It gives me an idea for my A3 that is becoming a 4x4 and this Geithner box.
Funny, I never thought of mating them before.
Attachments
tobyS
Well-known member
I hope your going to re-spool up your cable in nice neat rows from left to right. Pulling like that makes them fray. It takes a lot of tension to do it right....can be 2-3 person job. I have a couple of frayed spots in my boomtruck winch cablee from pulling overlapped cables.
That’s what I’m wanting to do with my A2 and basically converting it to a camper.
Sent from my iPhone using Tapatalk
Torquewrench
New member
Second attempt to motivate myself to c/o my HH orings.
I'd by lying if I said I was not nervous.
I've got four videos that I have been rewatching all week.
I have got a flat driveway, and perfect weather.
Thought:
If it -does- runaway, could I not simply crush/disconnect the fuel line before the secondary fuel filters? 0.o
#fourdecadesofgaming
I'd by lying if I said I was not nervous.
I've got four videos that I have been rewatching all week.
I have got a flat driveway, and perfect weather.
Thought:
If it -does- runaway, could I not simply crush/disconnect the fuel line before the secondary fuel filters? 0.o
#fourdecadesofgaming
