bushhawg73
Member
- 122
- 0
- 16
- Location
- Columbia, Missouri
Today I removed my breather housing and ran some new vacuum lines. Behind the breather housing I found a red or pink wire that comes out of the large wire loom from both directions. The wire goes into a black plastic connector. This is the strange part, the black plastic connector has a bare wire that comes out of one side and goes into the other side. There is what looks like some sort of resistor in the middle of the bare wire.
I searched today in the TM's and on the web but I am kind of lost as to what to call the setup. I also looked at the wire diagrams but never have been good and figuring those out. I have included two not so great cell phone pictures.
I really hope someone can help.
I searched today in the TM's and on the web but I am kind of lost as to what to call the setup. I also looked at the wire diagrams but never have been good and figuring those out. I have included two not so great cell phone pictures.
I really hope someone can help.
Attachments
-
45.6 KB Views: 48
-
36.8 KB Views: 43