• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Wiring Problems - M1028

NMerenda

Member
86
0
6
Location
Rochester, NY
Well the first issue is the (what I believe is a fusible link) in the first picture is fried. I could use a part number or maybe there is another way to "fuse" these two wires together. The second issue is there is a wire with a ring terminal on the end hanging down near the bumper on the driver's side. I have no idea what it is or where it's supposed to go.
2013-08-29 19.50.45.jpg2013-08-27 18.15.53.jpg
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Read the Fusible Link sticky and watch some youtubes on cutting and splicing. Parts are available at napa.

Fusable links are designed for a purpose. That is to "protect" your electrical system from catching fire.

that wire is your 12v feed for the entire 12v system.

the second pic is a ground wire for the headlight. Reattach on top of the radiator support near the overflow tank
 
Last edited:

NMerenda

Member
86
0
6
Location
Rochester, NY
Just got under front bumper, there is already a wire going to the radiator support by the coolant overflow. Anywhere else that wire could go? It's a black wire.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
It is a ground and if it reaches it also mounts with the other black wires on the radiator support.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks