- 7,584
- 365
- 83
- Location
- Cheyenne, WY
I have a slide in raised pintle hitch and magnetic lights you can borrow if you need them. I'll be in Rockmart, GA Sunday night and be there about a week and will have them with. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Wreckerman's diabolic hitch conversion invention
- Thread starter wreckerman893
- Start date
ONTOS66
Member
- 433
- 3
- 18
- Location
- Franklin, NJ
If anyone has one of these that they aren't going to turn in to scrap, I have a full set of the manuals for this rig in .pdf. If there is any interest I'll post them to the reference section.
I'd like a running one, but my driveway is full ... may have to move in the near future.
I'd like a running one, but my driveway is full ... may have to move in the near future.
- 12,195
- 327
- 0
- Location
- gainesville, ga.
hitch
wrecker,
how about something like this, the mount has extra holes so the pentle can be raised, the pentle is a combo rated at about 10000 lbs., i have pulled many a heavy air compresser, trailers, ect. with it over the years, i just move it from truck to truck (it was last on my f350)
wrecker,
how about something like this, the mount has extra holes so the pentle can be raised, the pentle is a combo rated at about 10000 lbs., i have pulled many a heavy air compresser, trailers, ect. with it over the years, i just move it from truck to truck (it was last on my f350)
Attachments
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
Thanks for all the tips and offers.
I went by the yard on the way in from Benning and the trailers are still there.
I'm going to make an offer to take all of them at once.
My design should serve me for the near future.
Freighttrain is off Friday and we can move three at a time (two in the bed and one towed) with his duece and I can pull one.
We can move them all in two lifts.
I may hold off on scrapping the two best ones in case someone wants a complete one to take to shows.
I'll post pics of the move and the trailers when I get them to my area.
I went by the yard on the way in from Benning and the trailers are still there.
I'm going to make an offer to take all of them at once.
My design should serve me for the near future.
Freighttrain is off Friday and we can move three at a time (two in the bed and one towed) with his duece and I can pull one.
We can move them all in two lifts.
I may hold off on scrapping the two best ones in case someone wants a complete one to take to shows.
I'll post pics of the move and the trailers when I get them to my area.
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
Well.....I got everything hooked today and connected the trailer to the F-150.
I went on a very short shake down run.
It pulled good but there was a lot of bump, bump, bump, which I assume is from flat spots on the tires.
Tomorrow I will put the engine on the trailer and load up a bunch of my excess military gear and hit the flea marker at dark thirty Sat. morning.
I cranked the engine today and it ran good. Sounded like an old VW. If I don't sell it I have some very strange ideas about powering a home made buggy.
I'll try to remember to take the digital camera to the flea marker and make some photos.
I went on a very short shake down run.
It pulled good but there was a lot of bump, bump, bump, which I assume is from flat spots on the tires.
Tomorrow I will put the engine on the trailer and load up a bunch of my excess military gear and hit the flea marker at dark thirty Sat. morning.
I cranked the engine today and it ran good. Sounded like an old VW. If I don't sell it I have some very strange ideas about powering a home made buggy.
I'll try to remember to take the digital camera to the flea marker and make some photos.
Attachments
- 7,584
- 365
- 83
- Location
- Cheyenne, WY
Let us know what you need for one and what's missing.
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
OK....one more post and I'll quit 
I pulled the M105 trailer to the flea market last Sat. and tried to peddle it and the engine and genny set up.
I got no takers but I met a lot of people intersted in MV's including the owner of a M37 who was in the dark about parts. I quickly turned him onto SS.
When I got back I decided to seperated the engine from the rest of the stuff to save space. I cut off part of the aluminum frame that the engins sits on and it prob weighs 40 pounds. KA CHING KA CHING....mo money from the scrap man.
There are a lot of cables and small boxes that might be of interest to the faithful.
If you see something you are intested in PM me and we'll talk. I'll trade for anything that don't eat.
I pulled the M105 trailer to the flea market last Sat. and tried to peddle it and the engine and genny set up.
I got no takers but I met a lot of people intersted in MV's including the owner of a M37 who was in the dark about parts. I quickly turned him onto SS.
When I got back I decided to seperated the engine from the rest of the stuff to save space. I cut off part of the aluminum frame that the engins sits on and it prob weighs 40 pounds. KA CHING KA CHING....mo money from the scrap man.
There are a lot of cables and small boxes that might be of interest to the faithful.
If you see something you are intested in PM me and we'll talk. I'll trade for anything that don't eat.
Attachments
wreckerman893
Possum Connoisseur
- 15,644
- 2,127
- 113
- Location
- Akenback acres near Gadsden, AL
Oops. More pics.
I have a few more pics of the genny and control boxes but I forgot to resize them.
If anyone wants a closer look I'll PM to you.
I have a few more pics of the genny and control boxes but I forgot to resize them.
If anyone wants a closer look I'll PM to you.
