Search results

Rick if you want the stock front springs I have them but they are shot IMO it had a front end sag when I bought it With the death wobble did you air up all the tires because they all only had like 10psi in them. I would probably replace all the steering components because there no doubt shot...

Nice she sounds good for not running for almost a year

I also wouldn't recommend a 700r4 till the axles are changed or you'll fry over drive

I'm the previous owner the tranny is out of a 1987 k5 with a 350 the transfer case would be a 32 spline I never was able to get the black out lights to work but I never looked into trying to fix them Get a flywheel for a K30 with a 6.2 it has the same j code engine napa has them for a...

Hey that looks familiar Glad you made it back safe & without too many issues Enjoy

I think the reason they are so scarce is because of the Dana 60 & 14 bolt alot have either been parted or people are holding on to them

I have only put 600 miles on my M1009 since I have owned it if I drove it as much as I did my duramax it would cost more monthly to keep it running than the payment is on the Duramax. It has not been drivable 3/4 of the time I have owned it and I am sorry to say it is a POS and I don't...

4" lift Yeah I am going to remove the blocks do a shackle flip in the rear and a zero rate hopefully that will level it out

It has been lifted since November but I finally took some pics

cool I am doing this swap as we speak in my M1009 I have hated the turbo 400 since I have got it ruuning

A 700r4 wont do anything to make the truck do hills better If it can't do it in 3rd 1:1 OD isn't going to help anything turbo or regear should be the options and honestly if you are driving it on a regular basis I reccommend both

in the process of pulling out the turbo 400 to swap in a SM465

Just put on larger tires

I have two 30 inch cherry bombs on my M1009 and they are not loud at alll

I did because I was having starting problems and wanted to eliminate the relay as a possibility. I am still having starting problems but I am pretty sure the batteries are at fault this time

x2 Also they can be started with out using any of these methods. When I replaced my injection pump all I did was crack loose the front two injection lines and used the bleeder on the filter

xx 2

You wont hurt the 10.5 14 bolt. The RAWR (rear axle weight rating) is usually limited by the tires or springs that axle can handle whatever you would throw at it. The dana 70 is comparable strength wise with the 14 bolt some would argue the 14 bolt is stronger because it has a extra pinion...

Terminator rise of the machines has some in it

Well its all fixed I pulled the plug and on the firewall side the terminal for the wire was slid back. I pulled down the fuse panel and tried to get it to stay but it wouldn't. Not wanting to have it leave me stranded I cut the wire off the plug on the engine side and ran a short wire to the...