• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

What did you do to your deuce this week?

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,167
3,071
113
Location
NORTH (Canada)
Just found out today that the radiator that I pulled from the 76 is not repairable and the new one that I bought new has been damaged in storage so now I am going another route. Ordered one for a Case MX100 tractor off of fleabay, Looks like I can make it work.
Please take pictures if you find that this mod works! It might help others.
 

Kwaligura

Member
Steel Soldiers Supporter
98
1
8
Location
Adena, Ohio
Finished the alternator bracket. I wish there was a 24 hour hardware store around. Need some 1 inch long 7/16 bolts and lock washers.20191029_211128.jpg
 

Aussie Bloke

Well-known member
716
336
63
Location
Lost, out bush in OZ
G'day everyone,....


Just came back in from giving my Deuce a once over by torchlight,....

Yeah, its night time here as I type this.

I haven't moved the Deuce since I parked it when I got back from Cruiserkhana,...

I did notice the left hand vented shield in the wheel arch isn't bolted down along the bottom,.. explains a rattling vibration I have had.

Also the left side of the engine between the oil filter canisters is wet and seems to have run down the side of the engine, not a lot, just enough to wet it a little.

Nothing I am concerned about but I will spray some degreaser on it and hose it off, I just like a clean engine bay,.....

I also found the bolts holding the rear mud guard on have come loose and will need tightening,....

And here is a strange thing, there are some strange brackets on the back side, I'll take some pics tomorrow, one even has a circular cup?

Not sure what the bracket is for but I am sure wiser minds will let me know.

I just need to give my Deuce a good sweep out and a little TLC, The other day I renewed its club rego so I am good to go for another year!



Aussie.
 

FloridaAKM

Well-known member
2,699
392
83
Location
Gainesville, Florida
Thought that fit nicely! For some reason it didn't attach?

I checked out the Deuce & took her to work today @ the Chemical Plant where I work. Since it is a homeland security facility, security was quite surprised when I drove up to the gate @ 05:00 wait to get in & get to work. They finally realized who I was & was no threat & let me in. That was a first as I have had the truck for over 5 years & been here many times.
 

Another Ahab

Well-known member
17,815
4,139
113
Location
Alexandria, VA
I checked out the Deuce & took her to work today @ the Chemical Plant where I work. Since it is a homeland security facility, security was quite surprised when I drove up to the gate @ 05:00 wait to get in & get to work. They finally realized who I was & was no threat & let me in. That was a first as I have had the truck for over 5 years & been here many times.
You gave them some morning energy. Maybe made their day!


:jumpin::beer:
 

Kwaligura

Member
Steel Soldiers Supporter
98
1
8
Location
Adena, Ohio
Mounted the alternator, had to run to NAPA for some longer belts. Just waiting on the radiator to get done. The guy was able to repair it after all. I guess all it took was a little criticism about it being his job. He said that he is semi retired and usually stays away from that kind of job. I will save the Case tractor radiator that I bought for a Cummins swap because the core is too thick and the radiator guard would have to be moved 2" forward and the hood hold downs modified. 20191101_145411.jpg
 

Aussie Bloke

Well-known member
716
336
63
Location
Lost, out bush in OZ
G'day everyone,......



G'day everyone,....


And here is a strange thing, there are some strange brackets on the back side, I'll take some pics tomorrow, one even has a circular cup?

Not sure what the bracket is for but I am sure wiser minds will let me know.

_MG_0743.jpg_MG_0742.jpg


That's the bracket next to the support bracket.

On one side is a metal cup, I thought it might be a rubber bush or spacer but it is metal.

Its a separate item so not sure what its purpose is,...?

Anyone know?





Aussie.
 

USAFSS-ColdWarrior

Chaplain
Super Moderator
Steel Soldiers Supporter
18,469
5,476
113
Location
San Angelo, Tom Green County, Texas USA
G'day everyone,......






View attachment 781742View attachment 781743


That's the bracket next to the support bracket.

On one side is a metal cup, I thought it might be a rubber bush or spacer but it is metal.

Its a separate item so not sure what its purpose is,...?

Anyone know?





Aussie.
I actually have no idea what that bracket is for.

But I've just got to add this: "It's there to make young troops ask questions..... Now carry on."

:goodjob:rofl
 

jeffhuey1n

SMSgt, USAF (Ret.)
Steel Soldiers Supporter
1,806
1,239
113
Location
Laramie County, Wyoming
Hi, looked at your mystery bracket but I need a clarification on one of the pictures. Do the two parts I have marked with arrows align with each other? Is there a hole through the beam that links these two parts?
G'day everyone,......






View attachment 781742View attachment 781743


That's the bracket next to the support bracket.

On one side is a metal cup, I thought it might be a rubber bush or spacer but it is metal.

Its a separate item so not sure what its purpose is,...?

Anyone know?





Aussie.
 

Attachments

Last edited:

Aussie Bloke

Well-known member
716
336
63
Location
Lost, out bush in OZ
G'day everyone,.....



Do the two parts I have marked with arrows align with each other? Is there a hole through the beam that links these two parts?


Each of those brackets are at the top of each mug guard support, the one with the cup is at the support on the outside and both face the same way, neither face each other.


And no, there isn't a hole as they are not connected.






And Nomad1, I have a A3 bed. (dropside).



Aussie.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks