3dubs
New member
- 424
- 2
- 0
- Location
- Houston, TX
CUCV FAQ Article is great and I love that I can quickly find the TM's but one needs to be added. TM 9-2815-237-34 it covers working on the IP and much more.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Moderators
- Thread starter 3dubs
- Start date
3dubs
New member
- 424
- 2
- 0
- Location
- Houston, TX
It is there now. Is there TM 9-2815-237-34P I have been looking but can't find it.
- 9,576
- 210
- 63
- Location
- Dickson,TN
Any member can add to/edit the article. If you see something missing, feel free to add it.
3dubs
New member
- 424
- 2
- 0
- Location
- Houston, TX
I have TM 9-2815-237-34P but I am not authorized to upload it to the TM's.
b4thundr
Member
- 391
- 8
- 18
- Location
- LaFayette, NY
is that the hummer's engine?
- 8,414
- 2,467
- 113
- Location
- Monrovia, Ca.
If you have it in PDF, link it here and I'll see if I can get it uploaded.
3dubs
New member
- 424
- 2
- 0
- Location
- Houston, TX
It covers HMMWV and CUCV 6.2 and 6.5. It is really helpful. It will also help if you get a HMMWV engine and put it in your CUCV. I was trying to replace O-rings on the throttle shaft of the injector pump. I looked at it and thought I figured it out but did not want to break anything. After searching the CUCV TM's I went to the internet and found the other TM and it explained very part of rebuilding the IP. I found that I was right in what I thought would work. But I figured it could help other people too. It explains pre 1990 or 1990 on. It is not CUCV specific but it covers the engine down to much more detail. I like how it tells you in each section what tools you will need.