• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Moderators

m16ty

Moderator
Moderator
Steel Soldiers Supporter
9,576
211
63
Location
Dickson,TN
Any member can add to/edit the article. If you see something missing, feel free to add it.
 

3dubs

New member
424
2
0
Location
Houston, TX
is that the hummer's engine?
It covers HMMWV and CUCV 6.2 and 6.5. It is really helpful. It will also help if you get a HMMWV engine and put it in your CUCV. I was trying to replace O-rings on the throttle shaft of the injector pump. I looked at it and thought I figured it out but did not want to break anything. After searching the CUCV TM's I went to the internet and found the other TM and it explained very part of rebuilding the IP. I found that I was right in what I thought would work. But I figured it could help other people too. It explains pre 1990 or 1990 on. It is not CUCV specific but it covers the engine down to much more detail. I like how it tells you in each section what tools you will need.
 
Top