Recent content by Boisemed

Thanks Awesomeness it is weird. I know the fans work normally when driving as they come on when she gets hot (solenoid must work). When driving and I flip fan switch to test they come on and stay on till I shut the switch off! must be alternate pathway as you suggest I have to download TM's and...

i have a 1078 that has an issue with the fording fan switch. Instead of the fan switch turning off the fan motors it turns them on when activated. The truck came to me in this condition and i would like to correct it, could it be wired backwards?

Just installed 100 gal Transfer Flow tank in bed of my 1078 and i need to figure out fuel tank connections on top of tank. It looks like there is a spare port with a plug on top im wondering if i can install tank connection there or is there a return line I can tap into? misplaced my manual. Any...

I'm trying to find a roof cargo rack for the M1078 which I can also attach lighting. I have read a bunch of threads where people have made their own, are there any ready made racks out there that would work that anyone has successfully used? If so how were they mounted? Links? thanks

I"m sure you guys have beat this one to death, but i'm in the process of converting my CUCV tailgate to an electric lift. I have all the hardware and an old wiring harness I pulled from the junkyard. My question is according to the diagram I looked at at the Chevy dealer, there is a "motor...

yes, service drive lever in up pos.

I know this has been mentioned before, but I have no lights whatsoever and the switch is in the "on" position. The truck starts and runs great. All fuses seem to work. Did doghead mod previously with no issues. Any ideas?

That would be really helpful. I thought I would have to make all new mounting hardware I.e. Weld up new brackets. The whole thing is considerably stronger the the M1009 and better looking.

I would like to know if anyone has put the M1008 beefy (truck) bumper on an M1009? I picked one up and noticed all the hardware is different but the frame spacing is about the same. Do I need to make custom frame attachments?

sounds like the pawl that the lock engages is broken or regulator gear is stripped

2 stroke oil?? how much do you add per tank and is this for normal driving or only Winter?

me six :p

Thanks, I will check the plugs today. I did the resistor bypass and I am also doing your starter relay mod.

I am going through everything starting with all the grounds removing and sanding all contacts. It sounds to me like a bad ground with the cliking when you engage the ignition but no starter turnover. The resistor is supposed to drop the voltage at the glow plug relay to 12V? I am also looking at...

what about the #3 wire from batt. 2?